Key B Organ viscount Legend Mode D'emploi page 50

User Manual
This pedalboard will play the instrument's pedalboard drawbars.
NB
Even though both the [IN] and [PEDALS KEYB ONLY] ports are MIDI inputs, it is strongly adviised to use the [PEDALS
KEYB ONLY] connector with MIDI pedalboards, since the port has been developed for this purpose. Furthermore,
notes received through this connector are recalculated according to the currently set transposition (if any) and then
sent to the [OUT 1] and [OUT 2] ports, so they can be played also through external devices.
- [THRU]: this port transmits the incoming data from the [IN] port to other MIDI devices (e.g. to play the
data transmitted by an external sequencer, through Legend / Legend Classic / Legend Live, with an
external expander module).
- [OUT1] and [OUT2]: this connectors send out the MIDI data generated by Legend / Legend Classic /
Legend Live. Connect this port to the MIDI input of the receiving device (e.g. an expander module).
For more information about the Legend / Legend Classic / Legend Live MIDI interface, refer to par. 6.2.
5. [USB TO HOST] connector: this USB port can be used to:
- connect a computer or any MIDI device equipped with this kind of port to send and receive MIDI data.
- connect the instrument to a computer and use the Legend Editor application .
- connect the instrument to a computer and update the instrument's firmware through the Viscount
Legend Update application.
NB
The applications Legend Editor and Viscount Legend Update can be downloaded from www.viscountinstruments.com.
6. [USB CHARGER] connector: USB socket to power and/or charge the battery of a multimedia device such
as smartphones or tablets.
7. [MAINS AC-IN] connector: plug here the power cord supplied with the instrument.
NB
In some models, the fuse in the [MAINS AC-IN] socket is not present.
8. [POWER] switch: on / off switch.
EN - 14