Picture Adjust (Bright/Contrast/Color/Hue) - Pioneer AVD-W8000 Mode D'emploi

Adjusting the screen

Picture Adjust (BRIGHT/CONTRAST/COLOR/HUE)

You can change the brightness [BRIGHT] of black, contrast [CONTRAST], darkness of
colors [COLOR], and the hue [HUE] of video to taste. Separate settings are stored for
video from VCR1 and that from VCR2.
1. Display the video to adjust.
Press the SELECTOR or V.SEL button.
2. Display a menu screen (Refer to page 17).
The [PICTURE ADJUST] menu is displayed. [BRIGHT] has already been selected.
3. Select an item to adjust.
Press the VOLUME control (∞/5) buttons.
4. Adjust the item.
Press the 2/3 buttons.
BRIGHT BRIGHT BRIGHT
CONTRAST CONTRAST CONTRAST
COLOR
HUE HUE HUE
DIMMER DIMMER DIMMER
Either can be adjusted within the range of –24 to +24.
5. Complete the setting.
Press the WIDE/MENU button.
Each time you press the button, the setup menu changes.
Press the button a number of times to close the menu and complete the setting.
BRIGHT
CONTRAST
COLOR
HUE
Note:
• The settings of [BRIGHT] and [CONTRAST] are stored separately for light ambient (daytime) and
dark ambient (nighttime).
• A yellow mark (
on the screen, respectively, as the front-panel ambient light sensor determines brightness or dark-
ness.
19
P I C T U R E A D J U S T
S E L
Adjustment item
Brightness of black
Contrast
Color darkness
Hue
) or blue mark (
The external light sensor of the display senses
the ambient brightness and displays a mark indi-
cating the current brightness.
(blue) : when dark (nighttime)
(yellow) : when bright (daytime )
2 side
Makes black appear darker.
Narrows the gap between
black and white (darken).
Makes colors appear lighter.
Increases red.
) is displayed to the right of [BRIGHT] and [CONTRAST]
3 side
Makes black appear lighter.
Widens the gap between
black and white (brighten).
Makes colors appear darker.
Increases green