Functional Description - Makita AF505 Manuel D'instruction

FUNCTIONAL DESCRIPTION

CAUTION:
• Always disconnect the hose before adjusting or
checking function on the tool.
Adjusting depth of nailing
B
A
To adjust the depth of nailing, turn the adjuster. The
depth of nailing is the deepest when the adjuster is
turned fully in the A direction shown in the figure. It will
become shallower as the adjuster is turned in the B
direction. If nails cannot be driven deep enough even
when the adjuster is turned fully in the A direction,
increase the air pressure. If nails are driven too deep
even when the adjuster is turned fully in the B direction,
decrease the air pressure. Generally speaking, the tool
service life will be longer when the tool is used with lower
air pressure and the adjuster set to a lower depth of nail
driving.
CAUTION:
• Always disconnect the hose before adjusting the
depth of nailing.
Hook
CAUTION:
• Always disconnect the hose from the tool.
• Never hook the tool at high location or on poten-
tially unstable surface.
The hook is convenient for hanging the tool temporarily.
007181
1. Adjuster
1
007182
1. Hook
1
ASSEMBLY
CAUTION:
• Always disconnect the hose before carrying out any
work on the tool.
• Load the same kind, size and uniform length of
nails when loading nails in the magazine.
Loading nailer
Press the lever and open the sliding door of the maga-
zine by pulling it toward yourself with the lever pressed.
Align the tip of nails with the grooves at the bottom of the
magazine and push the whole part of nails toward the fir-
ing opening.
Close the sliding door.
Nose adapter
CAUTION:
• Always disconnect the hose before installing the
nose adapter.
To prevent the surface of workpiece from being
scratched or damaged, use the nose adapter by fittiing
the protrusion of the inside of nose adapter with the
notch in the contact arm.
5
007183
007184
007185
1. Protrusion
2. Nose adapter
1
2