THOMSON SB160IBT Mode D'emploi page 15

Auxiliary Input RCA (Requires an RCA cable)
1. Connect an RCA cable to the Auxiliary Input. Connect the other end of the RCA cable to the audio
output on your DVD player, stereo system, gaming system or television.
2. Press the power button to turn the unit on.
3. Press the MODE button to switch to Aux In mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.
Using the USB/SD input
1.
Plug your USB flash drive or SD card to the USB socket or SD slot
2. MODE
Press button to select USB or SD mode, the unit can play automatically. If not, press
3. press the /
4. Press the VOL+/VOL– to adjust the volume.
Remarks:
• USB port is easy to sensitive equipment, will cause the equipment work is not stable.
USB charging
There is a USB charger on the side of the unit to charge small devices such as smartphones that
can be charged via USB.
Output power: 5V/1A
Wireless induction charging for mobile
There is a charging surface on the top of the unit for charging your smartphone. Please place the
smartphone on the charging spot :
Your smartphone will begin charging. If not, please make sure the phone is placed on the center of the
charging spot.
* Your phone must be compatible with wireless chargers or Qi technology.
Bluetooth Mode
A. Pairing with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with different
cell phones. Please refer to the user manual of your cell phone for further information. The general
pairing steps are as follows:
1. Keep SB160IBT/SB260IBT/SB265IBTand Bluetooth cell phone within 1 meter when pairing.
2. Press button, and press the MODE to select the Bluetooth mode.
3. Switch on your cell phone's Bluetooth function and search for Bluetooth devices. After the
search is completed, select "
4. According to indication, enter password or PIN No: "0000" and press "Yes" or "confirm"
After successful pairing, select "
5.
list and press "connect".
B. Music Playback
Connecting with a A2DP cell phone or Bluetooth transmitter.
1. Connect your cell phone or Bluetooth transmitter with SB160IBT/SB260IBT/SB265IBT.
2. You can listen to your music from SB160IBT/SB260IBT/SB265IBT now when playing it back.
3. Press Vol+ to turn up the volume, press Vol- to turn down the volume.
4. Press to skip to the previous song.
5. Press to skip to the next song.
to select track.
.
SB160IBT/SB260IBT/SB265IBT
SB160IBT/SB260IBT/SB265IBT
- EN 6 -
" from the Bluetooth device list.
" from the Bluetooth device
.