Tempo Fitness 632T Manuel D'utilisation page 5

WATER BOTTLE HOLDER
GRIP PULSE HANDRAILS
ON/OFF SWITCH
CIRCUIT BREAKER
POWER CORD
CAUTION ATTENTION PRECAUCIÓN
KEEP HANDS AND FEET GARDER LES MAINS ET LES MANTENGA LAS MANOS Y LOS
AWAY FROM THIS AREA. PIEDS LOIN DE CETTE REGION. PIES LEJOS DE ESTA AREA. LOS
HIGH-PRESSURE LES AMORTISSEURS À HAUTE AMORTIGUADORES DE ALTA
SHOCKS COULD CAUSE PRESSION PEUVENT CAUSER PRESIÓN PODRÍAN CAUSAR
BODILY INJURY. DES BLESSURES. LESIONES.
RUNNING BELT / RUNNING DECK
TRANSPORT WHEEL
UNDERNEATH FOOT LATCH
8
632T_OM_rev1_2.indd 8-9
CONSOLE CONTROLS AND DISPLAY WINDOWS
SAFETY KEY PLACEMENT
SUPPORT BAR
CONSOLE MAST
FOOT LOCK LATCH (UNDERNEATH DECK)
MOTOR COVER
SIDE RAIL
ROLLER END CAP
REAR ROLLER ADJUSTMENT BOLTS
pRE ASSEMBLY
TOOlS INClUdEd:
F Screwdriver
UNpACkING
F 6 mm T-Wrench
F 5 mm L-Wrench
Place the treadmill carton on a level flat surface. It is recommended that you place a
F 4 mm L-Wrench protective covering on your floor. Take CAUTION when handling and transporting this
unit. Never open box when it is on its side. Once the banding straps have been removed,
do not lift or transport this unit unless it is fully assembled and in the upright folded
pARTS INClUdEd:
position, with the lock latch secure. Unpack the unit where it will be used. The enclosed
treadmill is equipped with high-pressure shocks and may spring open if mishandled.
F 1 Console Assembly Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill.
F 2 Console Masts
F 1 Support Bar
WARNING
F 2 Bottom Console Covers
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill
F 1 Hardware Kit
from packaging until specified to do so in the assembly instructions. You may
F 1 Safety Key
remove the plastic wrap from console masts.
F 1 Bottle of Silicone Lubricant
(for 2 applications)
WARNING
NEEd HElp?
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
If you have questions or if
NOTE: During assembly, do not completely tighten any screws or bolts until step 4 is
there are any missing parts,
complete!
contact Customer Tech
Support. Contact information
NOTE: A light application of grease may aid in the installation of hardware. Any grease,
is located on the back panel
such as lithium bike grease is recommended.
of this manual.
9
4/25/11 3:44 PM