oughly each time after you use it. Remove the grass and
dirt. Clean the ventilation openings. It is best to clean the
plastic parts with a wet cloth and a soft detergent. Never
use aggressive detergents or solvents. Do not pour
water into the machine and do not sprinkle it with water.
Store the mowing machine in a dry place, never expose
it to frost and keep it out of children's reach.
For more extensive maintenance or repairs, give the
mowing machine to the service center.
Repair service
Repairs to electric power tools should only be carried out
by a specialised electrician.
Waste disposal and environmental pro-
tection
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a coll-
ection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its im-
plementation in national law, waste electric tools must
be collected separately for environmentally-compatible
re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling ma-
nagement and waste acts. This does not pertain to the
accessory parts and auxiliary equipment without elec-
trical components accompanying the waste equipment.
Spare parts
The following information should be provided when
ordering spare parts:
•
Type of machine
•
Item number of the machine
Nylon blade (20x)
Protective cover
Additional handle
Rechargeable battery
Charging station
Warranty
For this tool, the company provides the end user - inde-
pendently from the retailer's obligations resulting from
GB | Operating Instructions
Art.-No. 15132382
Art.-No. 15132375
Art.-No. 15132347
Art.-No. 17180910
Art.-No. 17180920
the purchasing contract - with the following warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by
the original purchasing document. For commercial use
and use for rent, the warranty period is reduced to 12
months. Wearing parts, rechargeable batteries and
defects caused by the use of non fitting accessories,
repair with parts that are not original parts of the manu-
facturer, use of force, strokes and breaking as well as
mischievous overloading of the motor are excluded from
this warranty. Warranty replacement does only include
defective parts, not complete devices. Warranty repair
shall exclusively be carried out by authorized service
partners or by the company's customer service. In the
case of any intervention of not authorized personnel, the
warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
EC Declaration of Conformity
We, ikra GmbH - Schlesierstrasse 36 - 64839 Münster
- Germany, declare under our sole responsibility that the
product Grass Trimmer with Rechargeable Battery
HATI 18 LI, to which this declaration relates correspond
to the relevant basic safety and health requirements of
Directives 2006/42/EC (Machinery Directive), 2014/30/
EU (EMC-Guideline), 2011/65/EG (RoHS-Guideline),
Only charger: 2014/35/EU (Low Voltage Guideline) and
2000/14/EC+2005/88/EC (noise directive) incl. modifica-
tions. For the relevant implementation of the safety and
health requirements mentioned in the Directives, the fol-
lowing standards and/or technical specification(s) have
been respected:
EN 60335-1:2012+A11:2014; EN 50636-2-91:2014
EK9-BE-89;2014; EK9-BE-77:2015; EK9-BE-91:2015
AfPS GS 2014:01 PAK; EN 62321:2009
EN 55014-1:2006+A1+A2; EN 55014:2:1997+A1+A2
EN 50581:2012
Only charger:
EN 60335-1:2012+A11:2014
EN 60335-2-29:2004+A2:2010
EN 62233:2008; EK1 557-13:2013
AfPS GS 2014:01 PAK
EN 55014-1:2006+A1+A2; EN 55014-2:1997+A1+A2
EN 61000-3-2:2014; EN 61000-3-3:2013
measured acoustic capacity level
guaranteed acoustic capacity level
Notified Body: Intertek 0905
Conformity assessment method to annexe VI / Directive
2000/14/EC
The year of manufacture is printed on the nameplate and can be
additionally retrieved via the consecutive serial number
Münster, 15.11.2017
Matthias Fiedler, Senior Product Manager Ikra GmbH
Maintenance of technical documentation:
Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
GB-8
87,9 dB (A)
91,0 dB (A)