Control Panel And Features - Kenmore 110.22532512 Guide D'utilisation Et D'entretien

1
2
WASH TEMP
1
Wash Temp senses and maintains uniform water temperatures
by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric and
soils being washed. For best results and following the garment
label instructions, use the warmest wash water safe for
your fabric.
On some models and cycles, warm and hot water may
■
be cooler than your previous washer.
Even in a cold and cool water wash, some warm water
■
may be added to the washer to maintain a minimum
temperature.
All rinses are cold.
2
WATER LEVEL
Set the Water Level knob to the Auto Sensing setting and
the washer will fill to a level that ensures the load engages
the agitator. From this point, the electronic control will sense
the load and determine if additional water is needed. Set the
Water Level knob to the Deep Fill setting and the washer will
fill to the maximum water level.
4

CONTROL PANEL AND FEATURES

2 3
1
Not all features and options are available on all models.
Appearance may vary.
NOTES:
Expect longer cycle times due to extended fill times when
using the Deep Fill option.
Deep Fill is not available in the Normal cycle mode.
Selecting the Normal cycle with the Deep Fill setting will
result in auto sensing of the water level.
3
FABRIC SOFTENER
On models with a separate Fabric Softener knob, this option
must be set to "Yes" when using fabric softener in the fabric
softener dispenser. This ensures that fabric softener is added
at the correct time in the rinse for even distribution.
4
WASH CYCLE KNOB
Use the Wash Cycle knob to select cycles on your washer.
See the "Cycle Guide" chart for detailed descriptions of cycles.
5
CYCLE STATUS LIGHTS
The Cycle Status Lights show the progress of a cycle. At each
stage of the process, you may notice sounds or pauses that
are different from your previous washer.
4
5 6
4
5
6