Adjusting Light Head Tilt - Cameo ZENIT W600i Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 67
MANUAL LOCKING FUNCTION
In addition to the ability to automatically protect the lamp from accidental and unauthorised
operation (see "Settings" - "Auto-lock"), the controls can also be locked manually. Press and hold
the UP and DOWN controls simultaneously for approximately 5 seconds. If an attempt is made to
change settings, "Locked!" will appear in the display, and changing the spotlight's settings via
the controls is no longer possible. After approx. 1 minute, the current operating mode is displayed
again. To unlock, press and hold the UP and DOWN controls simultaneously for approximately 5
seconds. The display will show the previously displayed information.

ADJUSTING LIGHT HEAD TILT

The light head tilt is adjusted using the supplied face spanner (A). Loosen the two-hole screws
on both sides of the retaining bracket (B) only so far that the light head moves freely, adjust to
the desired light head tilt and re-tighten the two-hole screws. Be careful not to over-tighten the
two-hole screws.
A
B
B
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Clzw600i

Table des Matières