Cameo ZENIT W600i Manuel D'utilisation page 16

CONFIGURE STANDALONE MODE
Press MODE to access the main menu (--- Menu ---). Use UP and DOWN to select the menu item
Stand Alone (observe arrow) and confirm with ENTER. In the sub-menu you can now select from
the standalone modes Auto, Color Macro, Static, Tunable White, und User Color and the timer
feature Timer with the UP and DOWN controls. Confirm your selection with ENTER.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
AUTO MODE (Program 1 to Program 6)
The 6 different auto-programs each comprise non-editable colour-change sequences. Brightness
and speed are independently adjustable. Select auto mode as described above under "CONFIGURE
STANDALONE MODE" and confirm with ENTER. Now use UP and DOWN to select one of the 6 auto
programs (observe arrow) and confirm with ENTER. To adjust brightness, use UP and DOWN to
select the menu item Dim and confirm with ENTER, then use UP and DOWN to select the desired
value between 000 and 255. Confirm with ENTER. Set the run speed by selecting the menu item
Speed, confirm with ENTER, and then select the desired value between 001 and 100. Confirm
with ENTER. Press MODE four times to return to the main display (Mode Auto).
------------ Stand Alone ------------
Auto
Color Macro
Static
Tunable White
User Color
Timer
16
------------ Stand Alone -----------
Auto
Color Macro
Static
Tunable White
User Color
Timer
---------------- Auto ----------------
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
------------- Program x -------------
Dim <255>
Speed <100>
Dim Speed
000 001
- -
255 100
001
Mode
-
Auto
100