Cameo ZENIT W600i Manuel D'utilisation page 17

COLOUR MACROS (Color Macro)
15 different preset colour macros are available. Select Color Macro as described above under
CONFIGURE STANDALONE MODE and confirm with ENTER. Using the UP and DOWN controls, now
select the desired colour preset (observe arrow) and confirm with ENTER (Colour Off = blackout).
A three-digit figure is shown on the display, and you can set the desired brightness on a scale
from 000 to 100 using UP and DOWN. Confirm with ENTER. Press MODE three times to return to
the main display (Color Macro Mode).
------------ Stand Alone ------------
Auto
Color Macro
Static
Tunable White
User Color
Timer
STATIC MODE (Static)
Static mode allows the functions Dimmer, Strobe and R, G, B, W to be adjusted directly on the
device with values between 000 and 255, in a similar way to with a DMX controller. In this way,
an individual scene can be created without an additional DMX controller. Select the static mode as
per the procedure previously described in SETTING STAND ALONE MODE and confirm with ENTER.
Now use UP and DOWN to select the menu item you wish to edit (observe arrow) and confirm with
ENTER. The display will now show a three-digit number field, and you can use UP and DOWN to
configure the desired value between 000 and 255. Confirm with ENTER. Press MODE three times
to return to the main display (Static Mode).
------------ Stand Alone ------------
Auto
Color Macro
Static
Tunable White
User Color
Timer
------------ Color Macro ------------
Color Off
Red <100>
Amber <100>
Yellow Warm <100>
Yellow <100>
Green <100>
Turquoise <100>
Cyan <100>
---------------- Static ----------------
Dimmer <255>
Strobe <255>
Red <255>
Green <255>
Blue <255>
White <255>
Blue <100>
Lavender <100>
Mauve <100>
Magenta <100>
Pink <100>
Warm White <100>
White <100>
Cold White <100>
000
Mode
-
Static
255
000
Mode
-
Color Macro
100
17