Technical Data; Package Contents; Technical Information - PROLUMIA LED PRO SIGN Manuel D'utilisation

ATTENTION
Please read the following instructions carefully to ensure that mounting operation will be carried out correctly. These instructions
should be properly preserved for future reference.
CAUTION
1. Do not work on the fixture when it is switched on.
2. Before installation, please confirm whether the lamp is damaged. Do not use the damaged lamp.
3. The luminaire should be installed by a professional electrician.
4. Do not cover the lamp housing after installation or expose the lamp to external forces.
5. Make sure the power is off before cleaning the lamp and clean it with a soft, dry cloth.
6. The LED module is not replaceable.
7. When the lighting is looking unusual, the power should be cut off immediately to ask a professional electrician to repair the fixture.
8. Do not punch holes in the lamp housing, which will cause the IP performance of the lamp to decline.
9. Do not stress the external wiring.
10. On many building sites, power circuits may be cut off in an uncontrolled and repetitive basis during construction. As a result, any unit on
these circuits, will have their batteries discharged or 'cycled' . Excessive battery cycling will reduce through-life performance and may lead to
premature battery failure. Battery warranty claims, as a result of such abuse, are specifically EXCLUDED from warranty terms.

TECHNICAL DATA

Decentrally powered fixture
Light source: LED SMD2835
Supply voltage: AC 220-240V 50/60Hz
Power consumption: 5W
Color temperature: 6500K
Operating temperature: +5°C – +40°C
Battery: Li-FePO4
Autonomy: Adjustable (1 hour / 3 hours)
Electrical safety class: Class II
330 mm
310 mm

PACKAGE CONTENTS

1. 1x emergency luminaire
2. 3x icons (left/right, up and down)
3. 1x white cover sheet for single-sided use
4. This manual

TECHNICAL INFORMATION

Art. no. LED type Dimensions (L x W x H)
(mm)
40000100 SMD2835 330 x 45 x 190
6
45 mm
5 mm
Power consumption
(W)
5
www.prolumia.com
VIEWING DISTANCE
Color temperature
(K)
6500