Safety Instructions; Technical Data; Technical Information - PROLUMIA LED Pro-Line Retrofit Manuel D'utilisation

ATTENTION
Please read the following instructions carefully to ensure that mounting operation will be carried out correctly. These instructions
should be properly preserved for future reference.

SAFETY INSTRUCTIONS

1. The safety of the luminaire is only guaranteed with proper installation and maintenance as well as its intended use. In the event of a change of the
luminaire or a non-intended use, there is a risk of life or fire due to electric shock or short circuit.
2. Do not look directly into the light source from a short distance.
3. The light source of this luminaire cannot be replaced. If the light source has to be replaced, the complete luminaire must be replaced.
4. Keep the luminaire away from strong electromagnetic radiation sources and ensure sufficient protection against a lightning strike.
5. The tensile strength of the luminaire must be guaranteed. According to EN 60598-1, the luminaire must be tested at each suspension point with
four times the mass plus its own weight.
6. Any parameterisation or modification may only be carried out in a voltage-free condition.

TECHNICAL DATA

Light source: LED SMD2835
Beam angle: 20°, 60°, 90°
Color rendering: Ra >80
Operating temperature: -25°C – +45°C

TECHNICAL INFORMATION

LED MODULES
Art. no. Beam angle / emergency unit
406403 / x / x x
0: 20°
1: 60°
2: 90°
3: 20°, with emergency unit
4: 60°, with emergency unit
5: 90°, with emergency unit
Rated life hours: L80 > 60,000
LED driver (included): CE
Input: 220 - 240V AC 50-60Hz
Safety class: Class I
1528
Light color / dimmable
x
1: 4000K, not dimmable / 5 core cable
2: 5000K, not dimmable / 5 core cable
4: 4000K, Dali dimmable / 7 core cable
5: 5000K, Dali dimmable / 7 core cable
www.prolumia.eu
7