Replacement Of The Focus Engraved Ring ( Feet Meters ) - Angenieux OPTIMO 19.5-94 Manuel Utilisateur

4.3 R
EPLACEMENT OF THE FOCUS ENGRAVED RING
- Remove the focus rubber ring (2)
- Put acetone on the head of the focus ring fixations screws Picture 7
- Remove the 3 screws picture 8
- Remove the lens bracket (6) and the 2 screws (5) Picture 9
- Remove the focus engraved ring in feet Picture 10
- Install the focus engraved ring in meters Picture 11
- Mount the 3 screws and tighten them to contact to prevent to have a too much stiff focus
torque Picture 11
- Put locking varnish 286642 on the 3 head of the focus ring fixations screws
- Mount the lens bracket (6) with the 2 screws (5) Picture 12
- Mount the focus rubber ring (2)
Focus engraved
ring in feet
Picture 7
Picture 10
Focus engraved
ring in meters
Picture 11
Edition : 04/2012
screw
screw
12
(
FEET
screw
Picture 8
Lens bracket
)
METERS
Lens bracket screw
Picture 9
screw
Picture 12
Référence : 311 747 A