Technical Data; What To Do If - Becker Centronic SunWindControl SWC241-II Notice De Montage Et D'utilisation

Assembly and Operating Instructions
Nominal voltage
Type of battery
Protection class
Permissible surrounding temperature
Radio frequency
Problem
Drive is not functioning.
The system does not
extended manually.
18

Technical data

What to do if ...?

Cause
1. Battery is flat.
2. Battery is inserted
incorrectly.
3. Receiver outside the
radio range.
4. Transmitter is not
programmed in the
receiver.
Wind speed exceeds
threshold value.
3 V DC
CR 2430
IP 20
-10 to +55 °C
868.3 MHz
Remedy
1. Insert new battery.
2. Insert battery cor-
rectly.
3. Reduce distance to
the receiver.
4. Programme transmit-
ter.
Wait until wind abates.