Indexa VA-707/2 Mode D'emploi page 17

Image adjustment
The Image parameters such as Brightness, Colour, Contrast and Hue can be selected by
pressing the "Func" button [15] each time the button is pressed the next parameter is
selected
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
SCALE
VIDEO
VCOMA
VCOMD
Press once more to leave the Image adjustment mode.
Mirror Image
By repeated pressing of the REV-button [14] various images can be selected.
default
These settings enable the monitor to be mounted upside down (eg. for ceiling mounting).
Fault finding
Fault
No Image or sound
Flickering Image
Normal sound, dark
or too bright image
Maintenance and cleaning
!
The system is maintenance free: do not open the device
!
Check the technical safety and function regularly
!
Remove the mains adapter from the mains socket before cleaning
!
Clean the surfaces of the devices using a soft, very slightly damp cloth or brush.
Do not use any cleaning material containing carbon, petrol, alcohol or similar, otherwise
the surface of the device will be attacked. Additionally the fumes can be unhealthy and
explosive.
Do not use sharp edged tools, screw drivers or metal brushes to clean the device.
Remote control: changing the battery
If the remote control fails to operate or the operating range has become reduced, then
replace the battery with a new one as follows:
!
Press the lock [31] on the backside of the remote control [27] to the right and pull the
battery holder [33] out of the remote control
!
Replace the old battery [32] with a new one
!
Press the battery holder into the remote controle
brightness
contrast
sharpness
color intensity
sets the format of the image
TV-system (PAL/NTSC): In Europe select PAL
Brightness of the OSD (On Screen Display) - also
adjusts the brightness of a subject when back lit
sets the image
horizontal
Mirror
Left/right
posible cause /remedy
There is no power. Check all power supply and cable
connections.
Strong light source within the view of the camera. Locate the
camera in another position.
!
Camera view is not bright enough. Use additional
lighting.
!
The monitor is not set correctly. Adjust the brightness
and contrast.
!
Strong light source or reflection with the view of the
camera. Locate the camera in another position.
horizontal and
vertical
mirror
vertical
mirror
up/down
default
GB - 19