Starmix Airstar T-C1 M Notice D'utilisation page 22

en
DANGER
Live electrical supply line and device components!
Risk of deadly electric shock in case of contact.
Before performing any work on the device:
1. Unplug power cord. With fixed connection: Switch off circuit breaker or unscrew fuse.
2. Secure against accidental switching on.
Remove hood from the device:
1. Unplug power cord. With fixed connection: Switch off circuit breaker or unscrew fuse.
2. Loosen upper two fastening screws of the hood.
3. Loosen lower two fastening screws of the hood.
4. Remove hood from the mounting plate.
5. Disconnect protective earth wire (PE) of the hood from terminal. NOTICE! Do not open the screw on the
metal hood.
Clean the air intake grille:
1. Unscrew locking screw on air intake grille on the underside of the device.
2. Pull air intake grille downwards out of the device.
3. Remove any lint and adhering dirt from the air intake grille.
4. Push air intake grille into the device from below.
5. Fix air intake grille with the locking screw.
Place hood on the device:
1. Place hood on the device. NOTICE! Do not damage protective earth wire. Ensure that motor protection
filter (Fig. A, item 7) is correctly seated.
2. Tighten lower two fastening screws of the hood.
3. Tighten upper two fastening screws of the hood.
4. Plug the plug into socket, switch on automatic circuit breaker or screw in fuse.
Cleaning the device
Do not clean the device with a high-pressure cleaner. Only use a damp cloth and mild cleaning agents to clean
the device. Acids, acetone or solvents can damage the housing or device components.
8 Disposal
Old equipment contains valuable materials which are designed for re-processing. The vacuum
cleaners must not be thrown away in the normal household waste, but should be disposed of at a
suitable proper collection system, e. g. via your communal disposal location.
22