Initial Operation - Starmix Airstar T-C1 M Notice D'utilisation

en
Connect device to power supply
See Fig. G, H
Observe the following conditions for the electrical connection:
– Only connect the device to a properly installed grounded socket.
– With fixed connection: Supply line must have a switch-off device, e.g. a circuit breaker that can be
switched off or a screw-in fuse.
– Connect the device to an electrical supply line with a residual current circuit breaker.
– Do not connect other loads to the electrical supply line of the device.
DANGER
Live electrical supply line and device components!
Risk of deadly electric shock in case of contact.
Before performing any work on the device:
1. Unplug power cord. With fixed connection: Switch off circuit breaker or unscrew fuse.
2. Secure against accidental switching on.
Connect electrical cables (see Fig. G):
1. Screw protective earth wire of the hood to terminal on the mounting plate.
2. Connect electrical supply cable to terminal.
3. Insert electrical supply cable into strain relief and fix it.
Place hood on device (see Fig. H):
1. Place hood on device. NOTICE! Do not damage protective earth wire. Ensure that motor protection filter
(Fig. A, item 7) is correctly seated.
2. Tighten lower two fastening screws of the hood.
3. Tighten upper two fastening screws of the hood.
4. Plug the plug into socket, switch on automatic circuit breaker or screw in fuse.

4 Initial operation

Please observe the following before initial operation
Ensure that the following requirements are met:
r Safety distances according to DIN have been observed.
r The power supply is properly connected.
r All filters are inserted and undamaged.
Switching on and off
The device is switched on and off without contact by means of the sensor:
1. Hold hands or head under the outlet opening of the device.
9 Sensor automatically switches on the device.
9 Device is switched off as soon as hands or head are removed from sensor range.
9 Device is automatically switched off if hands or head remain in sensor range for a longer period of
time:
Hand dryer: 35 seconds
Hair dryer: 4 minutes
20