Charging The Appliance - Philips Daisy Deluxe Dry Mode D'emploi

C
The crevice tool can be attached to the wall
holder by pushing it into the appropriate
fastening slot.

Charging the appliance

1 Make sure that the slide switch of the
vacuum cleaner is in off position (0) during
charging.The appliance will not charge if
the slide switch is in another position.
2 Insert the charger plug into the wall
socket.
C
3 Put the vacuum cleaner on the holder.
C
The indicator light will come on to indicate
that the appliance is charging.
The indicator light will stay on as long as the
appliance is connected to the wall holder and the
plug is in the wall socket.
The indicator light does not give any information
about the charge level of the built-in batteries.
Charge the appliance for at least 16 hours before
you use it for the first time.
Recharge the appliance as soon as the motor
power decreases noticeably.
4 Leave the charger plug in the wall socket.
Always place the vacuum cleaner back
ENGLISH
7