Intended Use; Product Description - Fisso 6646 Série Mode D'emploi

Intended Use

The Arm Support is used to position the patient arm during anaesthesia as well as during the initiation and
reversal phase of anaesthesia. It must only be used by trained medical personnel capable of judging and
controlling any danger to patients. If not the case, the user assumes all responsibility.
DANGER!
Unauthorized changes or modifications to the FISSO holding system are prohibited for
safety reasons.
DANGER!
All FISSO components are designed for optimal performance when used together with the
FISSO holding system. If a products / component from another manufacturer is used, the
user takes full responsibility.
DANGER!
The product will be delivered non sterile and is non-sterilisable. Prior to the initial and
each following use, the product has to be cleaned and disinfected as well as checked for
visual irregularities and malfunctioning according to the indications given in this manual.
Guideline for medical devices (conformity declaration)
This product corresponds to the regulation (EU) 2017/745 on medical devices.
Special care should be taken when these products are used together with high-frequency applications.
Contacts between the product and the high-frequency device must be avoided.

Product description

The product range along with all related information can be reviewed on www.fisso.com.
Arm support lateral
Art. # 6646.XX
Pad VE 450 mm
Articulated Arm 6600-46
Column -
with stop lid
Base component Rail clamping base
Fastening straps optional
(2 pcs) Art. # 5.890-VE
VE = anatomically shaped visco-elastic pad
Before delivery to the clients, the components are rigidly threaded to the articulated arm and additionally
fastened with glue.
EN
Arm support lateral Arm support vertical
Art. # 4646.XX Art. # 6656.XX
VE 450 mm VE 450 mm
4600-46 6600-56
18 x 215 mm
-
Rail clamping base Radial setting clamp
optional optional
Art. # 5.890-VE Art. # 5.890-VE
18
Arm support vertical
Art. # 4670.XX
VE 450 mm
4600-70
16 x 215 mm
Radial setting clamp
Fisso (partly
optional)
optional
Art. # 5.890-VE