Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
STEP 3
Install the DigiSender® DG300 Receiver
The DigiSender® Receiver will receive the signals sent from the Transmitter and
output them to a television or other connected device such as a DVD Recorder or
VCR.
STEP 1
Place the DigiSender® Receiver near to your
receiving TV.
STEP 3
Ensure that the Audio Video Channel is set to the
same channel as your Transmitter.
DG300 - DigiSender® Long Range Video Sender System
STEP 2
Connect the RCA Phono output to your receiving
TV.
STEP 4
Connect the supplied dipole antenna or long
range Yagi™ antenna cable.
ENGLISH
Page 7
Publicité
Table des Matières
