DigiSender DG300 Guide D'installation page 5

STEP 2
Install the DigiSender® DG300 Transmitter
The Transmitter unit is designed to transmit the Audio and Video from a
connected source.
STEP 1
Connect your source equipment.
STEP 3
Connect the supplied dipole antenna to the
DigiSender® Transmitter. Insert the SMA
connector and turn clockwise until firmly
attached.
DG300 - DigiSender® Long Range Video Sender System
STEP 2
Ensure that the Audio Video Channel is set to
Channel 1.
STEP 4
Connect the Power Supply Unit.
ENGLISH
Page 5