Storage; Troubleshooting - SilverCrest SGB 1200 A1 Mode D'emploi

Storage

GB
■ Wrap the power cable around the cable retainer
IE
on the rear of the appliance.

Troubleshooting

Fault
The appliance is not
working.
The control
lamp 6 comes on,
but the appliance
does not heat up.
The cooking time of
the food seems overly
long.
Smoke and odours
develop during use.
If the malfunction cannot be corrected as suggested above, or if you have found some other kind of
malfunction, please contact our Customer Service department.
10
Cause
The power plug is not connected to the
mains power.
The mains power socket is defective.
The appliance is defective.
The function switch 4 is set to
The glass door has been opened often to
check the cooking progress.
The wrong temperature level has been set.
There is detergent or food residue on the
heating elements.
■ Store the cleaned appliance and its accessories
in a clean, dust-free and dry location.
Insert the plug into a mains power
socket.
Use a diff erent mains power
socket.
Contact the Customer Service
department.
Turn the function switch 4 to the
.
OFF
desired function.
Do not open the glass door any
more often than is absolutely
necessary.
Check the temperature settings.
Remove the food from the appli-
ance and continue the cooking
process with the glass door open
until the smoke stops.
Solution
SGB 1200 A1