Using The Baking Tray; Before Initial Use - SilverCrest SGB 1200 A1 Mode D'emploi

To remove the hot rack 9, hook the tongs q
■
onto it as follows:
Fig. 4: Hooking the tongs q onto the rack 9

Using the baking tray

WARNING! RISK OF INJURY!
► Always use oven gloves or similar to insert
the hot baking tray 0 into the appliance or
to remove it.
Always place the baking tray 0 on the cor-
■
rectly inserted rack 9 in the cooking chamber
of the appliance.
CAUTION! MATERIAL DAMAGE!
Never place the baking tray 0 directly onto
►
the heating elements.
SGB 1200 A1

Before initial use

Once the appliance is set up correctly:
1) Insert the plug into a mains power socket.
2) Turn the temperature control 3 clockwise to
the maximum temperature (to the limit stop).
3) Turn the function switch 4 to "top and bottom
heat" .
4) Open the glass door and leave it open for this
operation.
5) Remove any installed accessories from the
cooking chamber.
6) Turn the timer 5 to 20 minutes.
NOTE
► The fi rst time the appliance heats up, a small
amount of smoke and odour may be gener-
ated due to production-related residue. This is
normal and is completely harmless.
Provide suffi cient ventilation; for example, by
opening a window.
The appliance switches off automatically
after 20 minutes.
If you want to interrupt the heating process
prematurely, turn the temperature control 3
counter-clockwise to the limit stop and set
the function switch 4 to
timer 5 to "OFF".
7) Allow the appliance to cool down, then clean
the appliance as described in the section
"Cleaning and care".
The appliance is now ready for use.
and set the
OFF
7
GB
IE