Troubleshooting - SilverCrest IAN 106348 Instructions D'utilisation Et Consignes De Sécurité

Troubleshooting

= Fault
= Reason
= Solution
=
= The scale is overloaded.
= Remove the overload.
= stays on in the LC display.
= The overload has caused a malfunc-
tion of the weighing process.
= Switch the scale off and then on again.
=
= The batteries are too weak. You
cannot bring the scale into use.
= Replace the batteries (see section
"Inserting / replacing batteries").
GB/IE 15