Local Time Setting; Sleep Timer - FTE UNIVERS U4128 Manuel De L'utilisateur

OSD 67
OSD 68
OSD 69
OSD 70
SYSTEM SETUP
"Timer Service" then you can enter additional data (OSD 67):
- Wakeup Message: press [
reminding message from Birthday, Anniversary and General.
- Wakeup Date: Use the [Number] buttons to input your wakeup
date.
- On Time: Use the [Number] buttons to input your wakeup
time. If date and time are reached, no matter if the system is in
standby mode or in playing mode, it will automatically show a
reminding message.
- The message will be displayed on the screen until you press
[Exit] to close it.
6. Press [Exit] to leave the "Timer" menu.

5.3.2. LOCAL TIME SETTING

When you select "Local Time Setting" and press [OK] then you
will see a window like the one beside (OSD 68):
1. GMT Usage: This item is used to set the time by using the time
signal from the satellite. Press [
2. The "GMT Offset" item is only available when "GMT Usage"
is set to "On". Press [
With every time you press the button the time offset will be
increased / decreased by half an hour.
3. Summer: this option is only available when "USE GMT" is
enabled. Use [ ] to switch on/off the summer timetable.
4. "Date" and "Time" items are only available when the "GMT
Usage" is set to "Off". Press [
use number buttons to input time and date directly.
NOTE: If the current channel provides the correct time
information, you will see the current time after you entered
"Time" menu. If the channel doesn't provide time information,
you have to input the date and time information manually. The
most channels support the time signal.
5. Show time: Use [
the option is enabled, the time will be displayed at the TV in a
frame in the top right margin.(OSD 69)
6. Press [Exit] to exit the menu.

5.3.3. SLEEP TIMER

Press [OK] button in this option to set the sleep timer. You will
see "SLEEP TIME OFF / SLEEP TIME 10 / SLEEP TIME 30
/ SLEEP TIME 60 / SLEEP TIME 90 / SLEEP TIME 120".
(OSD 70)
If you set a sleep time, the system will change to Standby mode
after the chosen time period.
PAG. 31
] to select the category of the
] to change the setting.
] to set the "GMT Offset" value.
] to select one item and
] to switch on/off this option. When