Time & Timer Setting; Timer - FTE UNIVERS U4128 Manuel De L'utilisateur

OSD 64
OSD 65
OSD 66
SYSTEM SETUP
1. Display Mode is used to switch the display mode. You can
select from Auto / PAL / PAL-M / NTSC 3.58. Press [
] to select the desired mode.
2. Aspect Mode is used to switch the screen aspect ratio mode.
You can select from Auto / 4:3 PS / 4:3 LB / 16:9. Press [
] to select the needed mode.
3. Video Output is use for switching the screen aspect ratio
mode. Now we provide below options: RGB / CVBS. You can
press [ ] key to select each mode circularly.
4. Press [Exit] to close the "TV System" menu.
* With this model, RGB output is not allowed.
5.3. TIME & TIMER SETTING
When you enter "Time" "Local Time Setting" or "Sleep Timer" a
menu with three items will be opened (OSD 64). Use [
to select between the three options and confi rm with [OK].

5.3.1. TIMER

Select "Timer" item and press [OK] to enter the "Timer list"
menu (OSD 65).
The current time will be displayed in the fi rst column. If the
current time is incorrect, please modify it with the [Number]
buttons at the "Time" menu.
1. Timer Number: You can press [
number. There are totally 8 timers.
2. Timer Mode: Select how often the timer is running: Once,
Daily, Weekly, Monthly and Yearly. Or switch the timer off.
3. Timer Service: Select between Channel (timer setting for
channel change and Wakeup/Sleep) and Message (reminding
message).
4. When you select "Channel" (timer setting for channel change
and Wakeup/Sleep) then you have further options you need to
set (OSD 66):
- Wakeup Channel: press [OK] to enter the channel list and
select the channel you want to see.
- Wakeup Date: use number buttons to input your wakeup
date.
- On Time: use number buttons to input your wakeup time. If
date and time are reached then no matter if the system is in
standby mode or in playing mode, it will automatically switch
to the channel you set and start to play.
- Duration: Here you can set the time you want to see or play
this channel. After the time set the system will automatically
switch to standby mode. If you don't want the box to be swit-
ched to standby mode then set the duration to 00:00.
5. When you select "Message" (reminding message) option in
PAG. 30
]
] to set the Timer