Multi Search - FTE UNIVERS U4128 Manuel De L'utilisateur

OSD 42
OSD 43
OSD 44
OSD 45
INSTALLATION
3. DiSEqC1.0: Use [
switches.
4. On "TP Index" item use [
transponder.
5. In the "FTA Only" item, press [
free channels or even scrambled channels. If you select "Yes" it
will scan free channels only.
6. In "Scan Channel" item, press [
Radio Channels, or just TV channels or just Radio channels.
7. In "Scan Mode" item you can select "Auto Scan" to blind scan
or "Preset Scan" to scan all preset transponders.
8. Move the highlight to "Search" and press [OK] button to
start scanning. Bars are showing the progress of the channel
scanning in the lower part of the window and the found channels
are listed (OSD 42).
You can stop the scan with [Exit] and save the so far found
channels.
9. Press [Exit] to exit this menu. A window to confi rm the
changes will appear.

4.2. MULTI SEARCH

When you enter the "Multi Search" menu a window like the one
beside will open (OSD 43).
1. On "Satellite" item press [OK] to open the satellite list (OSD
44). Then press [
[OK] to mark/unmark and [EXIT] to fi nish the selection. You
can select several satellites in this menu. At the bottom of
the screen you can see the selected satellites (OSD 45). The
system will use DiSEqC1.0/1.1 functions to search the marked
satellites and scan channels.
2. On "FTA Only" item, press [
channels or just scanning of free channels. If you select "Yes" it
will scan free channels only.
3. On "Scan Channel" item, press [
scanning range from TV + Radio Channels, only TV channels or
only Radio channels.
4. On "Scan Mode" item, you can select "Auto Scan" to make
a blind scan or "Preset Scan" to scan all preset transponders of
the selected satellites.
5. Select "Search" and press [OK] to start scanning. In the
lower part of the window the progress of scanning and the
found channels are displayed.
6. Press [Exit] to cancel or fi nish the scanning and saving the
found channels.
PAG. 25
] to switch the options of DiSEqC
] to select the desired
] to select to scan only
] to select to scan TV +
] to move the highlight and press
] to select scanning of all
] to select the