Panasonic NC-ZA1 Mode D'emploi page 43

5
Empty the drip tray and press
(Second phase)
6
Dispose of the water in the water tank and rinse it thoroughly. Press
. Then fill it with clean water and press
process. (Approx. 2 min.)
7
Press
8
Press
• Empty the drip tray.
Note
• The cleaning water is collected in the drip tray. Empty the drip tray or container when the display indicates that the drip tray must
be emptied.
• In the event of power failure during the descaling cycle, the programme has to be restarted.
• If is pressed during descaling, the process will be paused. To continue the descaling cycle, press
.
to return the main menu.
.
Note
• If is pressed during descaling, the
display indicates to empty the drip tray. To
continue the descaling cycle, press
Note
• If is pressed during descaling, the
display indicates to empty the drip tray. To
continue the descaling cycle, press
to continue the
.
.
.
GB43