Water Hardness Level - Panasonic NC-ZA1 Mode D'emploi

ml / oz selection
1
Press on the main menu.
2
Select "ml / oz selection" on the user menu.
3
Select "ml" or "oz" and press
save the setting.
• The selected setting will light up in blue.
*1 oz is approx. 28.41 mL
Note
• If there is no action for 30 seconds, the display will return to the main menu without saving the setting.
• If is pressed, the display will return to the previous display without saving the setting.
• When setting is completed, the display will return to the user menu. To return to the main menu, press

Water hardness level

1
Press
2
Select "water hardness level" on the user
menu.
to
3
Select level and press
setting.
• The selected setting will light up in blue.
(e.g. for very hard)
Soft
Q To check water hardness « P. GB18
Q To purchase a new test strip « P. GB47
on the main menu.
to save the
Very hard
.
GB31