Panasonic NC-ZA1 Mode D'emploi page 18

Before Use
<Setting water hardness>
Before using the espresso machine for the first time, it should be set to the appropriate water hardness for your area.
1
Determine the water hardness.
Dip the test strip into cold water for 1 second and shake off the excess water.
1
Read the water hardness from the pink-coloured areas on test strip after approximately 1 minute.
2
Water hardness level
Water hardness mol/m
German hardness
French hardness
Test strip
2
Press
3
Select "water hardness level".
4
Select level and press
(e.g. for very hard)
GB18
(Continued)
1
soft
up to 1.24
3
up to 7°
up to 12.6°
.
The selected setting will light up
in blue.
Soft
2
medium-hard
up to 2.5
up to 14°
up to 25.2° up to 37.8°
Note
• If the no action for 30 seconds or
return to the main menu.
to save the setting.
Note
• If the no action for 30 seconds, the display will return to the
main menu without saving the settings.
• If
Very hard
display without saving the setting.
3 4
hard very hard
up to 3.7 over 3.7
up to 21° over 21°
over 38°
is pressed, the display will
is pressed, the display will return to the previous