Panasonic NC-ZA1 Mode D'emploi page 40

How to Clean
5
Press
• Empty the drip tray before starting cleaning cycle.
• Information clock is turning during cleaning.
• When cleaning is completed, information clock will
be full bars, then return to the main menu.
GB40
(Continued)
to start cleaning cycle.
Empty the drip tray or container
when the display indicates that
the drip tray must be emptied.
Note
• The cleaning water is collected in the drip tray. Alternatively, you can
place a container (> 250 mL) under the spout.
• In the event of power failure during the cleaning programme, the
programme has to be restarted.
• If is pressed during cleaning, the process will be paused. To
continue the cleaning cycle, press .