Using The Remote Control - Schluter Systems LIPROTEC LT EBR 1 Mode D'emploi

3.1 Using the remote control

Please note:




3.1.1 Controlling the receiver with a remote control
In order to operate the Bluetooth receiver with the remote
control, proceed as follows:
Make sure that you are in the Bluetooth receiver's

reception area.
You can turn the LIPROTEC system on and off by

pressing the "On/Off" button (see fig. C, pos 2).
You can access the saved preliminary settings of

the receiver by pressing the "up" and "down" arrow
keys (see fig. C, pos 3 and 4).
Bluetooth receiver operating instructions
The remote control supplied with the
Bluetooth receiver is already connected to
it. You can use it as soon as possible as
described here.
Individually purchased remote controls
must first be connected to the Bluetooth
receiver as described below.
You can connect up to five remote control
with one Bluetooth receiver.
Do not use a remote control to control
several Bluetooth receivers at once.
EN
Operation
21