emerio SS-123248.1 Mode D'emploi page 9

NOTES:
For better cleaning, please ensure that the temperature dial is turned to "MAX" setting before activate the
clean function. The cleaning may be not so good or cannot be performed if the temperature dial is turned
to other temperature settings except "MAX" setting.
Cord winding groove
When not in use, the steam supply hose and power cord can be winded along the cord winding groove for
storage.
BEFORE FIRST USE
1. Remove any sticker or protective foil from the soleplate.
2. Fill the water tank with water and heat up the iron, and then iron over a piece of damp cloth for several
minutes for the purpose of removing any residue on the soleplate according to the section of "Steam
ironing".
1) It is normal that strange odor comes out from the unit for the first use. This will cease after a short
while.
2) Some particles may come out of the soleplate when you use the iron for the first time. This is
normal; the particles are harmless and stop coming out of the iron after a short while.
3) When you activate the steam function, the appliance may produce a pumping sound. This is normal;
the sound tells you that water is pumped into the appliance.
4) During the heating process of the soleplate, there will be little steam coming out from the soleplate
automatically and this phenomenon will continue for about 3 seconds. This is normal.
5) There will be little condensation water in the steam supply hose after first use. But in the second
use, the condensation water will be sprayed out together with the steam at the beginning of
releasing steam. This phenomenon will continue for several seconds. This is normal.
3. If all the indicators keep blinking after being powered on, it means that the appliance has
malfunctioned. Please stop using the appliance and contact the after-sales service department.
USING YOUR APPLIANCE
The appliance has two ironing functions. You can use dry ironing or steam ironing; the details refer to the
following:
Dry ironing
1. Put the iron on the thermal insulation stand of the unit base.
2. Connect the plug to the wall outlet.
3. Turn the temperature dial to select your desired temperature setting, which is depended on the fabric
of garment. The iron starts heating. Refer to "Ironing tips" and "Additional table" as below when select
the temperature.
4. When the selected temperature is reached, the temperature indicator turns off. You can start ironing
now.
Warning: Never touch the hot soleplate at any time before cooling down!
- 8 -