Percentages Function (%) - Gram AHZ Série Manuel D'utilisation

7. Press the
8. Select the sample number from "10pcs" to "500pcs".
9. Put on the platter the quantity of pieces that corresponds to a selected
value.
10. Press the
11. The display will show "- - - - - -" for a few seconds.
12. The balance is ready to perfom the counting of pieces.
The greater quantity of pieces put in the initial sample, the greater accuracy
in balance's results.
If the sample value is less than 0.2d, the display will show the message
"no-Cou". This means that the sample is too small; therefore, you will need
to add a greater sample.

PERCENTAgES fUNCTION (%)

1. Keep the
2. Press again the
3. The message "PER" will appear on the display.
4. Press the
5. The display will show "100%".
6. Put on the platter an object considered as 100%.
7. Press the
key.
key.
key pressed for 3 seconds.
key twice.
key to confirm.
key.
9