Table Des Matières; Precautions - Sharp HT-SL70 Mode D'emploi

Masquer les pouces Voir aussi pour HT-SL70:
Table des Matières

Publicité

Accessories (continued)
For HT-SL70 only.
Sound Bar Cover Joint
for 46" (117 cm) TV (short) x 1
Contents
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . 3
Preparation for Use
System preparation . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6
Falling prevention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Placing the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
System Connections . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

Precautions

General
Please ensure that the equipment is positioned in a
well-ventilated area and ensure that there is at least
10 cm (4") of free space along the sides, top and
back of the equipment.
10 cm (4") 10 cm (4")
ACTIVE SUBWOOFER SYSTEM
HT-SL70
Use the unit on a firm, level surface free from vibration.
Keep the unit away from direct sunlight, strong
magnetic
fields,
excessive
electronic/electrical equipment (home computers, fax
machines, etc.) which generate electrical noise.
Do not place anything on top of the system.
Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low
temperatures.
Sound Bar Cover Joint
for 52" (132 cm) TV (long) x 1
Page
10 cm (4")
10 cm (4")
dust,
humidity
and
Stand Cover x 2
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . .11
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
If your system does not work properly, disconnect the
AC power lead from the wall socket and replug.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Attention should be drawn to the environmental aspects
of battery disposal.
This unit should only be used within the range of
5°C - 35°C (41°F - 95°F).
The apparatus is designed for use in moderate
climates.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result in
a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
E-2
Stand Base x 2
Page

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ht-sl75

Table des Matières