Table des Matières
Publicité
HT-SL70 and HT-SL75 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
Notes:
●
This product is recommended for flat panel TV (LCD and plasma).
●
For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.
●
This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore
for HDMI connection, your TV's CEC must be enabled. For detail, refer to the operation manual of the TV.
●
For TV without HDMI CEC, headphone or RCA (variable output) analogue connection is available.
●
For TV without HDMI, headphone or RCA (variable output) connection is required.
●
This unit supports HDMI which enables ARC (Audio Return Channel).
Recommended Connection:
TV Type
HDMI
(with ARC)
with HDMI
HDMI TV without
CEC & ARC or non
HDMI TV
The illustrations printed in this operation manual are for the model HT-SL70.
Accessories
The following accessories are included. This product has no remote control.
RCA to Headphone
Cable (1pin - 2 pins) x 1
Wall Mount
Pattern Paper
Angle x 2
For HT-SL75 only.
Sound Bar Cover Joint
for 60" (152 cm) TV (short) x 1
ENGLISH
CEC FUNCTION
MUST BE ENABLED
MUST BE ENABLED
NONE
Subwoofer Stand
Audio Cable x 1
x 2
Speaker Wire
Sound Bar Cover Joint
for 70" (177 cm) TV (long) x 1
CONNECTION
HDMI IN
(ARC)
HDMI IN
HEADPHONE OUT
RCA
(VARIABLE OUT)
HDMI Cable x 1
Sound Bar Stand
x 2
Stand Cover x 2
E-1
CONNECTION METHOD
Page 8, Method 1
Page 8, Method 2
Page 9, Method 1
Page 9, Method 2
Wall Mount
Bracket x 2
Screw for
Sound Bar Stand
Brackets x 6
Cushion x 2
Stand Base x 2
Publicité
Table des Matières
