Häfele 271.91.114 Manuel D'installation page 19

GB
Bettlift with Cat. No.
271.91.135/136
Y = Total height of
base panel,
see Fig. 2 on page 6
2
Fig. 12
2 Raised-head screws
M4 x 12 mm for
adjusting the height
of the front panel
Preparing the front panel
max. 1454 mm
unten below
1
1
ca. 1150 mm
• Mark the holes to be drilled on the inside of the
front panel and drill them.
• Firmly screw each front-panel bracket 1 to the
front panel with two Hospa pan-head screws
4 x 17 mm.
• Screw the raised-head screws M4 x 12 mm 2 into
the two upper front-panel brackets, Fig. 12.
• Lay the front panel in front of the cabinet.
1
20 mm
2091 mm - Y
+ Base panel thickness
730 mm
1
20 mm
867 mm
19/40