Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. Remove the foot from the right front spacer by removing the
#8-18 x 3/8" (9.5 mm) screw.
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x 3/8" (9.5 mm) screw
3. In the same manner, remove the feet on the right rear,
left front, and left rear of the oven.
4. Using 2 or more people, place the oven in its upright
position.
5. Go to the "Make Electrical Connection" section.
A
B
C
Cutout Height Is Between 28¹¹⁄
(72.8 cm and 74.8 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Remove the foot from the right front spacer by removing the
#8-18 x 3/8" (9.5 mm) screw.
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x 3/8" (9.5 mm) screw
3. Rotate the foot 90°, so the short side of the foot is positioned
toward the top of the oven.
4. Reinstall the foot to the spacer using the #8-18 x 3/8"
(9.5 mm) screw previously removed.
5. In the same manner, remove, rotate, and reinstall the feet on
the right rear, left front, and left rear of the oven.
" and 29
⁄
"
7
16
16
A
B
C
9
Publicité
Table des Matières
