Jennair JJW2430I Instructions D'installation page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cutout Height Is Between 50½" and 51¹⁄
(128.2 cm and 129.9 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Install a foot on the left rear spacer using a #8-18 x 3/8"
(9.5 mm) screw.
NOTE: Position the foot, so the long side of the foot is facing
toward the top of the oven.
A. Spacer
B. Foot
C. #8-18 x 3/8" (9.5 mm) screw
3. In the same manner, install a foot on the right rear of the
oven.
4. Install a front foot on the left front spacer using a
"
8
#8-18 x 3/8" (9.5 mm) screw.
NOTE: Position the foot, so the long side of the foot is facing
toward the inside of the oven.
5. In the same manner, install a front foot on the right front
of the oven.
A
6. Using 2 or more people, place the oven in its upright
position.
B
C
7. Go to the "Make Electrical Connection" section.
A. Front foot
B. #8-18 x 3/8" (9.5 mm) screw
C. Spacer
A
B
C
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jjw2427iJjw2830iJjw2827i

Table des Matières