OHAUS TD52 Manuel D'instruction page 14

EN-12
Search
Select the Search submenu and press
the soft key corresponding to the icon
to search for the Wireless
Access Point (AP).
The search result will last for a few
seconds.
Select an AP, and press the soft key
corresponding to the icon to
connect to the AP.
If the password is needed, enter the
password by using numeric keys.
Connect successfully.
DHCP Client
The DHCP (Dynamic Host Configuration Protocol) client can be Off or On. If the DHCP Client
setting is On, the IP Address, Subnet Mask, and Gateway fields are assigned automatically by the
network and they are read-only. If the DHCP Client is Off, the IP address, Subnet Mask and
Gateway must be assigned manually.
IP Address
IP Address is 192.168.1.100 by default.
Subnet Mask
Subnet mask is 255.255.255.0 by default.