System Info - Cameo ROOT PAR TW Manuel D'utilisation

SYSTEM INFORMATION (System Info)
Starting from the main display, press MODE to go to the main menu. Using UP and DOWN, now select the System Info menu option and
press ENTER to confirm your selection.
This will take you to the submenu which will let you access system information (see table, use UP and DOWN to select, press ENTER to
confirm, use UP and DOWN to change status, press ENTER to confirm).

System Info

Firmware = Displays the device
firmware
Temperature = Displays temperature of
LED unit
Op. Hours = Displays operating time
12
Firmware V1.xx
LED xxx°C / xxx°F
Unit °C (= displays in degrees Celsius)
°F (= displays in degrees Fahrenheit)
xx:xx h Displays the total operating time in hours and minutes