Parts Description; Before The First Use - Princess 01.347000.01.001 Mode D'emploi

PARTS DESCRIPTION

1. Cover
2. Air outlet
3. Air duct
4. Body
5. Power button
6. Display
7. Air inlet
8. Base
9. Remote control

BEFORE THE FIRST USE

• Place the device on a flat stable surface and ensure a minimum
of 100 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
• Connect the power cable to the socket. (Note: Make sure the
indicated voltage on the device matches the local voltage before
connecting the device. Voltage 220V-240V 50-60Hz.)
• This device includes an overheat protection sensor and an
automatic fail-safe that cuts power to the unit if it's accidentally
tipped over or overheat. If this sensor is triggered, unplug the
machine and allow the fan to cool down. Check and remove any
obstructions before restarting the device and be sure to place
them on a hard, flat stable surface.
• The power switch or the power button on remote will turn this fan
to standby, not complete shutdown. Use the switch on the back
of the device to turn off completely when the unit is not in use.
• When the device will not be in use for a long time, please unplug
the power cord.
• Warning: The below may sometimes occur due to the overlap of
the remote control frequencies. Please pay attention to this while
using the remote control:
1. This device may react when using a remote control for other
appliances.
2. When using the remote control of this device, other electrical
appliances may react.
• Place 2x AAA batteries into the remote control, make sure the
polarity (+ and -) is correct.
Instruction manual
EN
5