FLAT
EN
12
Connect (+) and (-) where indicated.
12
13
Remove the right side decorative piece if the
vehicle is a left-side drive, or the left side decorative
piece if the vehicle is a right-side drive, then pass
the cabling through the downpipe and return to the
original position.
14
Remove the decorative piece from the upper
section of the right door if the vehicle is a left-side
drive, or from the left door if it is a right-side drive,
and pass the power cable above the upholstering
(A).
12
-
13
14
26
®
+
14
A