Hansgrohe AXOR Citterio 399611 Série Instructions De Montage / Mode D'emploi / Garantie page 4

1
2
1.
2.
3
4
1.
2.
English
Installation
Carlton 17960xx1/17965xx1
Remove the cap.
Cut the plaster shield so that it extends ¹⁄₁₆" outside the
surface of the finished wall.
If using an electric cutter, protect the tile.
Seal the wall around the plaster
shield with waterproof sealant (1).
Failure to seal the wall can lead to
possible water damage.
Install the slip connector (2).
Cut the slip connector so that it extends ⅜" outside the
surface of the finished wall (1).
Install the extension spindle (2).