Proper Waste Disposal - REHM BOOSTER 140 Instructions De Service

welding units has to meet special requirements. The possibility of using the unit in such an
environment should be checked for each individual case. The unit is not intended to be used
for more than one shift per day.
7 Maintenance
The unit does not require maintenance. However, the condition of the electrical cables must
be checked at regular intervals
7.1

Proper waste disposal

Only for EU countries.
Do not dispose of electric tools together with household waste material.
In observance of European Directive 2002/96/EC on waste electrical and
electronic equipment and its implementation in accordance with national
law, electric tools that have reached the end of their life must be collected
separately and returned to an environmentally compatible recycling facility
8 Technical Data Booster 140
Setting range
Duty cycle at I (10 min) at 20°C
max.
Welding current at 100 % duty cycle at 20°C
Welding current at 60 % duty cycle at 20°C
Power consumption at I
Open circuit voltage
Power supply voltage
Fusing
Power factor
Protection class
Dimensions L/W/H
Weight
14
max.
[A]
[ at 40°C] [%]
[ at 40°C] [A]
[ at 40°C] [A]
[kVA]
V
[A]
Cos 
[mm]
[kg]
.
5 - 140
40 [30]
110 [95]
125 [110]
6.2
91
230V/50Hz
16
0,7
IP 23
310/125/182
4.9