Operating And Fitting Instructions - Miele Plug & Pure APST 000 Mode D'emploi

General instructions

Operating and fitting instructions

A shut-off valve must be installed in front of the input hose of the
water filter system.
At a water input pressure >860 kPa (rel), a pressure reducer must be
installed in front of the filter system.
EN
Do not install near to sources of heat or naked flames.
Protect the filter system against sunlight and mechanical
damages.
The terminal device as well as the materials of all parts in contact with
water after the Miele water filter system must be suitable for operation
with demineralised water.
All parts must be installed in accordance with country-specific
guidelines for drinking water facilities.
14