Bosch PAM 220 Notice Originale page 28

28 | English
The mitre angle MTR, by which the two workpieces are to be shortened, is
calculated. For these mitre/bevel cuts, the saw blade is perpendicular to the
workpiece (the bevel angle is 0°).
Press the MTR (8) button. As long as you hold down the MTR (8) button,
the calculated mitre angle MTR, which has to be set on the mitre saw, will be
displayed. At the same time, the MTR indicator will light up in the display.
1 609 92A 56P | (12.07.2019)
x°
x°
Bosch Power Tools