Krüger & Matz KM0655 Mode D'emploi page 15

Owner's manual
CHARGING
Connect the headphones to AC charger or a compatible USB port. Red LED will
be on during charging. Once the charging is completed, the LED turns blue.
Note:
• use only original accessories to charge the headphones.
• charge the headphones at least once every 3 months to keep its battery
in good condition, even if not used.
• the headphone's battery must be charged in order to use them in
Bluetooth mode. However, when using in AUX mode, the headphones
will work even if the battery is empty.
• When the battery is low, a sound signal will be heard in the headphone
at 5-minutes intervals.
• Battery capacity status: when headphone is connected to Android/iOS
devices, the external device shows the headphone battery power status.
IMpORTANT: the function may not be compatible with very device,
due to different OS versions. producer does not guarantee function's
compatibility with every Android and iOS device.
TROUBLESHOOTING
Problem
Headphones won't
turn on
The batteries will
not charge
Can't perform
pairing
Solution
Make sure the headphones are charged
• If connected to a computer port for charging,
make sure the computer is ON and the USB port
is powered
• Confirm that computer is not in power-saving
mode
• Confirm that micro USB cable is properly
connected to
computer/charger
• Make sure the headphones and the external
device are within 1 meter from one another,
and both have Bluetooth function on
Make sure the headphones and the external
device are within 1 meter from one another, and
both have Bluetooth function on
both the headphone and
15