Steam Pocket - shark S3901 Série Manuel Du Propriétaire

To order additional parts and accessories, feel
free to contact us at www.SharkClean.com
or call 1.800.798.7398.
fig. 20

STEAM POCKET

CARE INSTRUCTIONS
®
Attach
Fit one side of the pocket onto the head first, then
using the loop, pull the pocket over the head. Attach
the quick fasteners on the top of the pocket to secure
in place. (fig. 20)
Care
Before washing, close the quick fasteners so they
don't get caught on each other. Wash the pockets
separately with warm water in the washing machine
using liquid detergent.
NEVER USE BLEACH OR FABRIC SOFTENERS
as they may damage or leave a coating that will
reduce the cleaning performance and absorbancy of
the pockets.
Pockets should be line dried or tumble dried in a dryer
on a low setting, as this will extend the life of the
micro-fiber fabric. (fig. 21)
Loose fibers can indicate wearing of the micro-fiber
fabric. Do not pull the loose fibers as this can cause
the weave to come undone. Simply cut the loose fiber
with scissors for continued cleaning. (fig. 22)
32 1.800.798.7398
fig. 21
Replacement
For best floor cleaning results, we recommend
replacing your micro-fiber steam pocket every 3-4
months following normal use.
As with any fabric, dirt particles, grease, friction and
repeated washing can cause the fibers to break down
and you may notice an increase in the effort needed
to push or pull the mop.
You can find and purchase replacement micro-fiber
steam cleaning pockets and accessories at local retail
outlets or by visiting our website www.sharkclean.com.
fig. 22