shark S3901 Série Manuel Du Propriétaire page 20

NOTE: See page 18 for Steam
Settings and Recommended Uses.
Your Shark Lift-Away
®
Mop is designed to clean surfaces that will
withstand high heat and moisture surfaces.
Do not use on unsealed surfaces (especially
wooden antique furniture), or surfaces that
have been treated with wax, oils, varnishes,
paint or shellac. The sheen may be removed
by the heat, steam, and friction of the cleaing
tools. It is always recommended to test an
isolated area of the surface to be cleaned
before proceeding.
Above Floor Cleaning:
• Remove the Handheld Steamer by pressing on the
release button and pulling away from the cradle.Be
careful to NOT press the steam trigger as you remove
the handheld steamer. (fig. 8)
20 1.800.798.7398
Pro Steam Pocket
™ ® We also recommend you check the use and care
instructions from the surface manufacturer.
When cleaning finished wood surfaces, use
broad, continuous cleaning strokes. To prevent
surface damage, avoid focusing steam or
allowing the cleaning tools to sit in one spot for
any amount of time.
fig. 8
• The Handheld Steamer is automatically set
to (SCRUB) mode. Squeeze the steam trigger to
activate steam. You may select other steam modes
depending on the accessory and the use.
• With all attachments, control Steam better by using
3-5 second burst of the trigger. This will allow you to
steam longer and with more control.